BISS SIA LAPAS KARTE | Ieiet | REĢISTRĀCIJA
Sākumlapa Pakalpojumi Preču katalogs Jaunumi Par mums Kontakti
Iekārtas un programmatūra
Kontakti
Adrese: Skanstes iela 50 (1. ieeja, 2. stāvs), Rīga, LV-1013, Latvija
Telefons: +371 67603360, 67611722
E-pasts: info@biss.lv
Papildinformācija:
Darba laiks:
D.d. 9:00 - 18:00
Preces Komunikācija un industriālo iekārtu pieslēgšanaPaplašināšanas kartes un interfeisa konvertori
Pārveidotājs Ethernet uz RS232
(kods: 48859)
Salīdzināt
51.43 €
Ielikt grozā
Atpakaļ
   

USR
Features of Serial RS232 RS485 RS422 Ethernet converter
Auto-MDI/ MDIX, RJ45 port with 10/ 100Mbps Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client.
Baud rate of serial port can be configured from 600 bps to 230.4 Kbps, supports check bit of none, odd, even, mark and space.
Heartbeat package mechanism to ensure connection is reliable, put an end to dead link.
User-defined registration package mechanism, check connection status and use as custom packet header.
Supports RS232/ RS485/ RS422 port ( Can not be used at one time).
Under TCP Server Mode, the connection number with client can be randomly set from 1 to 16, default number is 4. IP has been connected can be shown according to connecting with calculating send / receive dat.
When connection number reaches a maximum, the new connection is kicked off the old one can be configured by user.
Parameters can be configured by built-in web-page, AT command, serial port protocol and network procotol. Setting protocol is available to integrate into user 's software.
Supports TCP client short connection function, user-defined the disconnected time.
Device restart if no data transmission or timeout. User-defined the restart time.
If data buffer needs to clear configuration before TCP connection establishment.
Supports DHCP, automatically obtain an IP address and query IP address via serial setting protocol.
The global unique MAC address, user-defined MAC address.
DNS function:
DNS server address can be defined
Firmware can be upgraded by network
Provide Virtual com software
Restore factory setting through software or hardware
Running across the gateway, switches or routers
Can work in LAN, also can work in the Internet

Hardware:
Work Volt DC 5.0 - 36.0 V
Work Current 116mA - 5V/ 53mA - 12V Ethernet Port 10/ 100Mbps auto switch between cross and direct connection
Baud rate 600-230.4K bps
Serial Port RS232*1 / RS485*1 / RS422*1
Can 't be used at one time
Software:
Network Protocol IP, TCP/ UDP, ARP, ICMP, IPV4
IP Mode Static IP, DHCP
DNS User-defined DNS server address
Configure Software/ Webpage/ AT command
Work Mode TCP Server/ TCP Client/ UDP Server/ UDP Client
RFC2217 Supports resemble RFC2217
HTTPClient Supports
Connection Number Connection number with client can be randomly set from 1 to 16 under TCP server mode
Network Buffer Send: 6Kbyte, Receive: 4Kbyte
COM Buffer Receive: 2Kbyte
Avg. Transmission Delay
RS232: +
Ielikt grozā
Atpakaļ